Turning Drawings into Upper Hull Bulkheads
I’m turning the drawings into actual pieces of the boat: two sheets of 12mm plywood have become part of the upper-hull bulkheads, with plenty more still to cut for the other hull.
So now it is time to get all the drawings into actual pieces of the boat. What you see here is only a part of all the bulkheads in the upper hull - practically only major ones from one hull, plus bulkhead 7. Now it is just a small thing - repeat the whole thing for the other hull 😂
Btw, what you see here are essentially 2 full sheets of 12mm plywood turned into the pieces of the boat. When I finish with this part of the work, I’ll use 4 times more. If you want to compare the sizes of bottom vs upper part of the hull - ALL bulkheads for the lower hulls (both) fit on 3 sheets of plywood.
#tiki38 #buildingwharram #theseanation #allelectricboat
