> ## Content Index
> Fetch the complete content index at: https://seanation.org/llms.txt
> Use this file to discover other available public pages before exploring further.

# Turning Drawings into Upper Hull Bulkheads
- URL: https://seanation.org/turning-drawings-into-upper-hull-bulkheads/
- Published: 2024-05-15T12:33:42.000Z
- Updated: 2026-10-06T14:28:54.000Z
- Description: I’m turning the drawings into actual pieces of the boat: two sheets of 12mm plywood have become part of the upper-hull bulkheads, with plenty more still to cut for the other hull.
- Author: Monika Matis
- Tags: Ikaroa, Tech, #story-ikaroa, #facebook-import

So now it is time to get all the drawings into actual pieces of the boat. What you see here is only a part of all the bulkheads in the upper hull - practically only major ones from one hull, plus bulkhead 7\. Now it is just a small thing - repeat the whole thing for the other hull 😂  
Btw, what you see here are essentially 2 full sheets of 12mm plywood turned into the pieces of the boat. When I finish with this part of the work, I’ll use 4 times more. If you want to compare the sizes of bottom vs upper part of the hull - ALL bulkheads for the lower hulls (both) fit on 3 sheets of plywood.  
#tiki38 #buildingwharram #theseanation #allelectricboat

![](https://media.seanation.org/posts/104311468114809_967915295334775/002.webp)

![](https://media.seanation.org/posts/104311468114809_967915295334775/003.webp)

![](https://media.seanation.org/posts/104311468114809_967915295334775/004.webp)

![](https://media.seanation.org/posts/104311468114809_967915295334775/005.webp)

![](https://media.seanation.org/posts/104311468114809_967915295334775/006.webp)

![](https://media.seanation.org/posts/104311468114809_967915295334775/007.webp)